Availability: Ships Same Day Shipping as low as $5.99 Your Price: $42.50  Qty

Choose from the following options:

35' Selectable Pet Immune Motion Detector $24.95		60' Wide Area Motion Detector $32.95		100' Long Range Motion Detector w Tamper $44.95

The sole motion sensor on the market with N\O or N\C contact options in its price range. Can be utilized to start up video switchers or video recorders as well as alarm panels. The Interceptor features TAKEX America, Inc. world-wide renowned dependability and performance in an inexpensive detector.

TAKEX America, Inc. newly designed 4bit original microprocessor for PA-450/460 PIR. Added to improvement of the pulse count, PA-450/460 is fitted with Auto-reset memory.

High Stability

Immunities against power line noise, radio frequency, static electricity and radiation noise are improved.

Silent Relay

FET Photo-mos switch relay adopted at alarm output. Totally noiseless by eliminating the moving part which is inside of the relay device. Simultaneously, quick response and long life are maintained.

Various Functions

All the models are equipped with Auto reset memory, Tamper photo-mos FET switch.

Coverage Patterns

Series is on the market in both vertical and wide angle curtain versions.

Creep Zone

Zone focused just below sensor eliminates typical "dead" area directly under unit.

Area Adjustment

Coverage pattern can be adapted to allow for various mounting heights by moving the inside unit.

1. Pulse count switch PA-450 lets the device be set for either two or four pulse count to process an alarm output.
2. Alarm LED ON or OFF switch
3. Alarm contact changeover switch included. Can customize Alarm output as NO or NC.
4. Memory Switch Auto-reset memory can be shut down with the switch.

Specifications

Model	PA-450	PA-460
Detection system	Passive infrared
Coverage	Wide angle 35 ft. (11m) Max	Vertical curtain 55 ft. (16.5m) Max
Sensitive Zone	18 Pairs	6 Pairs
Supply voltage	9 to 18V DC (non-polarity)
Current consumption	25mA Max.
Alarm output	Dry contact (semi-conductor) (N.C /N.O. selectable) Reset : Approx. 2 secs. 24V 0.25A Max (protective resistance 3.3 ohm.)
Tamper output	0.1 A 30V N.C.
Alarm LED (Red)	• Blinking at warming up. Lighting at alarm (LED disabled) • Blinking at memory activated Lighting at memory indication
Coverage adjustment	Vertically 3 steps
Pulse count	2/4 selectable	2
Alarm memory	Autorest : 3 minuts blinking. 47 minutes lighting and automatically reset.
Low Voltage Notice	Dry contact alarm.
Ambient Temp. Range	-15°C to+55° (+5°F to 131°F) without condensation
Mounting Position	Indoor use only (celing mount with optional attachment BCW-401)
Weight	120g (4.2oz)
Appearance	Body : ABS resin Lens : PE resin

B-Wire Connector (Butt Splice) $6.50		500 Ft. of 22 Gauge Solid Alarm Wire $37.00		1000 Ft. of 22 Gauge Solid Alarm Wire $69.95		Burglar Alarms - Wired

Alarm Contacts		Shock & Glass Break Sensors		Smoke Detectors

Write your own review