DC Camera Power Distribution Kit

Elk DC Camera Power Distribution Kit, powers up to 9 cameras Elk | Part Number: ELK-PD9DC12

The DC Camera Power Distribution Kit is made to conveniently supply power for up to nine(9) possible 12 VDC cameras. Each individual camera output is specially protected with a 250mA automatically resetting PTC to prevent any shorted output from damaging the other outputs. The PD9 module includes visual LED power indication lights located on each output in addition to a Master Power On/Off Control. Two or more outputs can be connected in parallel for extra current. Kit is sold with: (1) Power Distribution Module (ELK-PD9) and (1) 12 Volt DC plug-in Power Supply (ELK-P1216).

FEATURES:

• Automatically Resetting (PTC) Overload Protection Capability (THIS MEANS NO FUSES to REPLACE).
• Includes a Master Power On/Off Switch Located on the Module.
• Visual LED Power Indicators available on each Output.
• Supplies Convenient Test Points for Measuring the Total Current Draw.
• Includes a Lifetime Limited Warranty.
• Housed by a Paintable White Plastic Enclosure

SPECIFICATIONS:

• Max Current Draw: 250mA from each output.
• Max Combined Current Draw: Not to exceed 1.6A.
• Input/Output Voltage: 12 Volts DC.
• Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack.
• Output Connection: Screw terminals (POS and NEG) for each output.
• Enclosure Size: 6.5" x 4.3" x 2".

View the ELK-PD9 Instruction Manual in Adobe Acrobat format (right-click to save document to your hard drive)

Please complete the following fields:

Review: