Telephone & Low Voltage Power Line

Elk Telephone & Low Voltage Power Line Elk | Part Number: ELK-950

The ELK-950 is an RJ31/38X Telephone Jack with a solid state transient power fluctuation suppression manufactured to protect both the Telephone and Low Voltage AC Transformer inputs on an alarm control panel. It automatically responds to power surges and transients in less than a 1 nanosecond time period, thus automatically restoring itself after every power surge occurring within the specified ratings. The ELK-950 is small, easy to install, and it features top quality, clearly labeled screw connection terminals, an 8 pin modular phone connector, an internal tamper detection loop, and automatic shorting pins for easy cord removal.

The ELK-950 is FCC Registered under part 68 and eradicates the necessity for having a separate RJ31X telephone jack. The AC Transformer inputs may be used alternately for surge protection of data transmission wires such as a keypad or zone expansion bus, so long as any measurable voltage level on the two data wires is lower than 24 volts.

FEATURES:

• Even Better Solid State Surge Suppression
• Faster Response Time
• Protects The Incoming Telephone Line
• Guards the AC Input from Transformer
• Designed to Clamp the Line-To-Line & Line-To-Ground
• Restores itself Automatically After Surges Within Ratings
• RJ31/38X 8-Pin Modular Jacks
• Has Convenient Test points for Lineman's Test set
• Surface Mount Housing
• Screw Terminals Included For Telco In-Out & AC Power
• Comes With a Lifetime Limited Warranty

SPECIFICATIONS:

• Response Time: < 1 Nanosecond
• Breakover Voltage: 300 Volts on Telephone Line, 50 Volts on AC line
• Peak Pulse Current: 100 Amps
• Max AC Input Voltage: 24VAC
• Ground Wire: 24" - 14 Gauge Stranded
• FCC Reg. No. 5K6USA-23140-XP-N Ren No. 0.0B
• Size: 4.4" x 3" x 1.15"

View the ELK-950 Instruction Manual in Adobe Acrobat format (right-click to save document to your hard drive)

Please complete the following fields:

Review: