Remote Monitoring and Alarm Notification System

When you need to monitor additional conditions or need to notify more people, the 800 is the best choice. It has all of the features of the Model 400, but instead of four external inputs, it is equipped with eight. It can also contact eight people instead of four.

The 800 has built-in monitoring for power failures, temperature, and sound monitoring of audible alarms. Four external inputs on the back can be connected to various external sensors to monitor temperature, water on the floor, humidity, intrusion and more.

When an alarm is detected, the 800 can notify eight people by making voice phone calls. It will continue to make phone calls until someone responds to the call. The 800 also includes nonvolatile memory and a 24-hour battery backup with user-installed batteries.

• Monitor 8 conditions, plus power failure and sound level.
• Notify 8 people with custom voice phone calls.
• Control a thermostat or other device automatically, manually, even remotely.
• No Monthly Fees

Input Zones:

• Flexible inputs that support: Normally Open or Normally Closed contacts, Temperature sensors: -20° F to 150° F, Eight channels in the Model 800.
• Automatic input type configuration.
• Programmable recognition times.
• Internal calibration.

Alarm Notification:

• Eight phone numbers in the Model 800.
• Makes voice phone calls with customized messages for easy identification.
• Built-in alarm test function to simulate and test the notification process.
• Includes telephone Line Seizure.

Voice Messages:

• Built in vocabulary for keypad programming and sensor readings.
• Record custom voice phrases in your own voice to describe each input zone.
• Record site identification message.

Microphone:

• Internal microphone for custom voice message recording.
• Monitor high sound alarms.
• Microphone can also be used for remote listen-in feature.

Output Relay:

• Low voltage NO/NC output relay included.
• Manual or automatic alarm response switching.

Remote Access:

• Call in with any Touch-Tone phone to check the status of all monitored conditions.
• Make programming changes remotely from any Touch-Tone phone.
• Remotely control the output relay.

Local Access:

• Keypad and speaker for local programming.
• Easy voice-prompted programming.
• Password-protected to restrict programming access.

Compatibility:

• The Sensaphone 800 is a direct replacement for the model 1108.

Power Supply:

• Comes with plug-in power supply.
• 24 Hour battery backup using 6 size C alkaline batteries (not included).
• Automatically monitors for power failure alarms.
• International power options available.

Built In CottageSitter Control:

• The built in relay can be used to remotely change the temperature of a dual setback thermostat. Provide your own, or order the FGD-0064 Thermostat from Sensaphone.

Specifications:

• Size: 71⁄2" W, 2" H, 81⁄2" D
• Shipping Weight: 4 lbs.
• Telephone Connection: FCC approved RJ-11 plug-in modular connector with 6' cord.
• Operating Temperature Range: Unit should be kept between 32° F and 120° F.
• Temperature Sensing Range: -20° F to 150° F with remote temperature sensor.
• NRTL listed for compliance with U.L. Standard 60950-1.