The GE 60-886-95 Learn Mode Shock Sensor has the following three main functions:
To detect the vibrations made by an intruder trying to break a window or door.
To detect a window or door opening.
To detect tamper situations, such as an intruder removing the sensor cover.
Vibrations cause a momentary open circuit in the shock element of the sensor. The circuit closes again when the vibration stops. The sensor microcontroller “sees” the open/close action as a pulse, causing the sensor to transmit an alarm signal.
The sensor has two different detection modes:
Gross Attack - detect a violent blow sufficient in length to trip sensor.
Pulse Count - detect a sufficient number of less violent blows (rapping or tapping).
The sensor includes an internal magnetic reed switch that must be disabled if it is not used. A cover tamper provides additional security if an intruder tries to disable or damage the sensor.
Specifications
Compatibility ................ All ITI 319.5 MHz Learn Mode Panels/Receivers Case dimensions ........... 1.4 inches W x 6.0 inches L x 1.25 inches H Operating temperature ... 32° to 122° F (0° to 50° C) Storage temperature ......-29° to 140° F (-34° to 60° C) Humidity ....................... 90% relative humidity non-condensing Battery ......................... Duracell DL123A or Sanyo CR123A 3V Lithium (ITI part number 34-030) Transmitter frequency..... 319.5 MHz Transmitter Range ......... 500 feet open air
Product Rebate
Accessories for this Product
Other Items to Consider
Product Reviews
Write your own review
Thanks for sharing your thoughts with us. Your review has been forwarded to our website team. Upon acceptance, it will be posted on this page within 24-48 hours.
Please complete the following fields:
Your Name (to display):
Your Email Address:
Review Headline:
