Ademco 7845GSMR | Honeywell 7845GSMR Wireless Communicator

The Ademco 7845GSMR / GSMV Cellular Communicator transmits signals to the AlarmNet-G network (GSM cellular network, which uses GPRS to complete these transmissions) and forwards them to your central station. If your current Central Station is capable of receiving signals from AlarmNet Central Stations, they are capable of receiving signals from the Honeywell 7845GSMR / GSMV.

Features:

• Quick Connection to compatible Honeywell/Ademco control panels.
• Simple Programming and Enrollment.
• Reports fire, burg, and status messages via wireless network.
• Allows uploading and downloading of control panel data via the wireless network.

Modes of Operation:

The 7845GSM provides four modes of operation so it can be used with various types of control panels.

• ECP Mode: This mode is for use with Honeywell controls that support LRR-ECP Communication.
• Zone Trigger Mode: This mode is for use with panels that do not support LRR-ECP Communication. There are 6 input zones built in for multiple zone signals.
• 4204 Mode & Two-4204 Mode: These modes are for panels that don't support LRR-ECP Communication, but do support 4204 Relay Modules.

Module Supervision Features:

• Network Communication Failure: In the event the AlarmNet network does not hear a supervisory message from the module within a specified time ("Supervision" option, 24 hours, 30 days or none), AlarmNet notifies the central station of a communication failure.
• Communication Path Failure: In the event the module detects a communication path failure, the control panel can be notified of a trouble condition with the module after a specified time has elapsed ("GSM Flt Time" option, 00-99 minutes).
• Fault Output: Terminal 11 can serve as a fail-safe trigger for radio fault conditions, including communication path failure and other internal failures that the device detects.
• Primary Power Loss and Low Battery Conditions.
• Cover Tamper Condition.

Specifications:

• Dimensions: 8.4" x 8.0" x 1.5"
• Weight: 2.4 lbs., with battery.
• Input Power: 9VAC, 15CA transformer, Honeywell part number 1332(Included).
• Backup Battery: 6V, 3.1AH, Honeywell part number K14139 (Included).
• Current Drain: 35mA average standby, 500mA peak transmit.
• Radio Fault Ouput: Open collector, 12VDC, .25W max.
• Input Trigger Levels: (V+) 2V-13V - (V-) 0V-1V
• Operating Temperature: -5 to 130 Degrees F.

$100 Rebate Available (limited time)

1. Order the 7845GSMR / GSMV
2. Sign up for a Total Connect account
3. Complete this simple form and we'll send you a $100 check. It's that simple!

$100 Rebate Available (limited time)

1. Order the Honeywell Cellular Communicator
2. Sign up for our Total Connect service.
3. Complete this simple form and we'll send you a $100 gift card. It's that simple!

Please complete the following fields:

Review: