• Supports Power 864, New PowerSeries™ and MAXSYS® control panels
• Instant, always-on IP communication
• Works over local LAN/WAN network or the Internet
• 128-bit AESencryption (NIST approved)
• Supports DHCP (dynamic IP addresses)
• Low network bandwidth requirements
• Compatible with 10/100BaseT networks
• Reports events to 2 different receiver IP addresses
• Polling and hardware substitution protection
• 4 on-board programmable inputs and 2 programmable voltage outputs as stand-alone module
• Programmable through the system keypad, PK5500 LCD keypad or T-Link Console software
• Software upgrades via network
• Download control panel via Internet with DLS2002SA software
• UL, CSFM and ULC Level 3/4/5 Listed
• T-Link Internet/Intranet Alarm Communicator TL250CE
• Supports PowerSeries™ (version 3.24 and higher) and MAXSYS® (version 3.31 and higher) control panels
• Instant, always-on IP communication
• Works over local LAN/WAN network or the Internet
• 128-bit AES encryption (NIST approved)
• Supports DHCP (dynamic IP addresses)
• Low network bandwidth requirements
• Compatible with 10/100BaseT networks
• Reports events to 2 different receiver IP addresses
• Polling and hardware substitution protection
• 4 on-board programmable inputs and 2 programmable voltage outputs as standalone module
• Programmable through the PK5500 LCD keypad or T-Link Console software
• Software upgrades via network
• Download control panel via Internet with DLS2002SA software
• Approval Listings: European CE Directives (EMC), FCC/IC, UL/ULC

Thanks for sharing your thoughts with us. Your review has been forwarded to our website team. Upon acceptance, it will be posted on this page within 24-48 hours.

Please complete the following fields:

Review: