Would you rather utilize 24V power supplies for your 12V cameras? Or is your camera's power source located too far away (more than 300 ft.) from the camera?

Then take a look at our 24 to 12 Power Converter. This handy device will let you place your power source at distances of 1000 ft. or greater away from the camera. All you have to do is simply hook up the Converter to the back of your 12V camera. Then hookup your 18 gauge 2 conductor (two wires) to the opposite end of the Converter and run out your wire.

Once you've completed your wiring setup, connect the wires to our 24V Power Supply (listed below) or use another 24V Power source that supplies a similar output to manage these long distances. It's that easy!