Ademco Glassbreak Detector w ValueGap® Magnetic Contact

Features:

• FlexCore Signal Processor - The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC)gadget, which processes audible data in parallel pattern rather than in sequence; this ensures faster, more precise detection decisions.
• The combination of proven FlexGuard operation with the speed of FlexCore processing supplies unsurpassed false alarm protection without compromising detection capabilities.
• Glassbreak Plus Forced Entry Detection - Glassbreak security is improved with a built-in ValueGap magnetic contact to monitor opening of doors and windows. The effect is dual protection in just one sensor.
• You Can Select the Sensitivity Settings - The sensitivity of the FG-1608 may be set in accordance with the acoustics of the room that it's in. There are two possible sensitivity level choices available: low or high. The range can then be confirmed remotely with the FlexGuard FG-701 Glassbreak Simulator.
• Detector Can Be Mounted Anywhere - The FG-1608 can be mounted in a window frame, on any wall, or on the ceiling, with no minimum range and a maximum range of 8 (2.4 m) from the glass.
• This Unit Covers All Types Of Glass - The FG-1608 works on all kinds of glass including plate, tempered, wired, laminated, film-coated, and sealed insulating glass.
• Multiple Domain Signal Analysis - The FG-1608 performs Multiple Domain Signal Analysis during which frequency and amplitude features are all checked for good signal qualification. This helps the detector to accurately distinguish false alarms from authentic glassbreak events, thus providing you with some of the best false alarm immunity available.

Two Sensors in One...

• ValueGap Contact - An integrated reed switch and individual actuator magnet supply forced entry protection as well as glassbreak detection.
• Has an Indicator LED - Displays detection of sound events and alarm status.
• Alarm Memory - Alarm LED can be set to latch in the event of an alarm; which helps you to identify which FG-1608 was triggered in the case of many detector applications.
• Enclosed PCB - The PCB is well shielded from possible damage during the setup process.
• Remote Test Mode Features Enable and Disable - The test mode can be set off remotely using the FG-701 Glassbreak Simulator.
• Test Mode Time Out - Unit automatically resets out of the test mode after a five minute idle period.
• Easy Install and Set-up Process - Mount within 8 (2.4 m) of the glass you want supervised. There is no minimum range. Choose between either low or high sensitivity. You're Finished.

Specifications

• Range:
  8 (2.4 m) maximum
  4 (1.2 m) maximum (for lowest UL setting)
  No minimum range
• Alarm Relay:Form A, 250 mA maximum25VDC maximum
• Alarm Duration:5 seconds (not disturbed by alarm LED latching)
• Tamper Switch:Cover tamper 25 mA maximum 24VDC
• Power Requirements:
  6 - 18VDC; 13mA typical at 12VDC, 22 mA max.
  AC Ripple: 4V peak-to-peak at nominal 12VDC
• Operating Temperature:
  14 to 122 F (-10 to 50 C)
  Storage: -4 to 122 F (-20 to 50 C)
• RFI Immunity:30V/m, 10MHz - 1000MHz
• ESD Immunity:Using either polarity, 10kV discharges reach exposed surfaces
• Magnetic Contact:
  Make gap 0.9" (2.3 cm) minimum
  Break gap 2.2" (5.6 cm) maximum
• Physical Dimensions:
  • Glassbreak housing:4-9/16" x 15/16" x 1-1/4"(11.6 cm x 2.3 cm x 3.2 cm)
  • Magnet housing: 4-9/16" x 15/16" x 1/2"(11.6 cm x 2.3 cm x 1.3 cm)
  • Weight:2.9 oz. (81 g)Packaged product; 3.8 oz. (108 g)
• FG-1608 Includes 5 Year Warranty

Please complete the following fields:

Review: