The new FG-1625RFM Glassbreak Detector features field tested FlexGuard technology that offers faster response and enhanced false alarm protection. The FG-1625RFM is specifically made to permit a fast, easy installation, while the adjustable sensitivity settings can adjust for the acoustics of any type of room. Best performance can be quickly validated using the FG-701 Glassbreak Simulator.
Features:
FlexCoreTM Signal Processor
The FlexCore Signal Processor is an Application-Specific Integrated Circuit (ASIC), that interprets audio data in parallel rather than sequential pattern for faster, more precise detection decisions. The combination of proven FlexGuard operation with the speed of FlexCore evaluation provides unsurpassed false alarm protection without compromising detection capacity.
Ease Of Installation and Setup
IntelliSenses exclusive technology allows remote operation of Test Mode (with simulator). The FG-1625RFM recesses into a 1.0"(26mm) diameter hole through sheetrock or a false ceiling. A hand-clap function comfirms that the detector is operational.
Selectable Sensitivity
Two dip switches on the FG-1625RFM make it easy to program the sensitivity to be compatible with the acoustics of the room. Four different sensitivity settings are available, ranging from very low to high. The Covered zones can then be confirmed remotely using the FlexGuard FG-701 Glassbreak Simulator.
Set up the Detector Anywhere
Mounts flush with any wall or in the ceiling, with no minimum range and a max range of 25 (7.6 m) away from the glass.
Handles All Glass Types
The FG-1625RFM works on all glass types, including laminated, plate, tempered, wired, sealed insulating and film-coated glass.
Multiple Domain Signal Analysis
The FG-1625RFM performs Multiple Domain Signal Analysis in which time, frequency and amplitude characteristics are evaluated for signal qualification. This enables the detector to accurately discriminate false alarms from true glassbreak events.
Patented Remote Test Mode
The Patented Remote Test Mode can disable or enable the indicator LEDs utilizing the FG-701 Glassbreak Simulator. Device auto resets out of Test Mode in five minutes.
Mounting Locations
The FG-1625RFM can be flush mounted in the opposite wall, in the ceiling, the adjoining wall, or the exact same wall as the glass through a 1" diameter aperature.
Specifications/Physical Dimensions
Small Front Cover: 1.8" (45mm) diameterLarge Front Cover: 2.5" (63.5mm) diameterWall Sleeve: For installation in 1.0 (25mm) hole. Maximum depth, without wire 2.6 (66mm)
Weight
Product Only: 0.96 oz (27.2g)Pkgd Product: 1.90 oz (54g)
Range
25' (7.6 m) max in all directions. Range can be changed; no minimum coverage range
Alarm Relay
FG-1625: Form A, 90mA max, 16VDC max
Alarm Duration
Five seconds (unaffected by alarm LED latching)
ESD Immunity
10kV discharges reach exposed surfaces using either polarity
Power Requirements
8 - 16VDC, 5mA typical at 12VDC; 12mA max (Latched LED)AC ripple: 4v peak to peak at the normal 12VDC
RFI Immunity
30V/m, 10MHz -1000MHz
Operating Temperature
14 to 122 F (-10 to 50 C)Storage: -4 to 122 F (-20 to 50 C)
Alternate Part #: CK-FG1625RFM
