Lowest prices and fastest service available by ordering online
Shipping as low as $6.95
Availability: Ships in 1-2 Days
Your Price: $69.95 Qty
Choose from the following options:
Similar Items to Consider
Product Description
The Visonic MCT-550 PERS is a fully supervised wireless flood detector compatible with PowerMax® and other Visonic PowerCode™ wireless security systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
In default mode, the Visonic MCT-550 PERS transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset. To ensure secure communication, transmissions use a PowerCode 24-bit ID command code, which is selected from 16 million possible combinations and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices.
Visonic's MCT-550 PERS transmits supervisory reports, including battery condition, to the wireless control panel or receiver at regular intervals – ensuring system integrity and functionality at all times.
The easily installed MCT-550 PERS wireless flood detector is available in various frequency bands according to international standards, and is approved for use in most countries.
Features
Detects water at ground level
Ideal for basements, yachts and holiday houses
Easy installation: includes a 3m (10ft) sensor cable for high positioning of the transmitter
Compatible with PowerMax and other Visonic PowerCode wireless systems
Approved and available in various frequency bands according to international standards
Specifications
Compatibility
Compatible with PowerMax and PowerMax+ alarm systems, MCR-308 receiver or any other PowerCode alarm system.
Frequency (MHz)
315, 433.92, 868.95, 869.2625 or other frequency according to local requirements.
Transmitter's ID Code
24-bit digital word, over 16 million combinations, pulse width modulation.
Overall Message Length
36 bits
Message Repetition
One-shot transmission (default) or once every 3 minutes (selectable).
Supervision
Signaling at 60-minute intervals (U.S. version) or 15 minute interval (UK version), or according to the local standards.
Response to Tamper Event
Tamper report every 3 minutes (until the tamper switch is restored).
Power Source
3V Lithium battery, Panasonic type CR-2 or equivalent.
Nominal Battery Capacity
750 mAh
Current Drain
6µA STBY, 17mA average in operation (including LED)
Battery Life with LED on
3 years (for typical use)
Battery Supervision
Automatic reporting of battery condition data as part of any transmission.
ALARM REPORT
Every 20 sec. for the first 3 minutes. Every 3 min. for the next 27 minutes. After this period the supervision message will include alarm signal until the event comes to an end.
Length of Flood Sensor Cable
3 meters (10 ft)
Weight of Flood Sensor Cable
Approx. 60 gr.
Operating Temperature
0°C to 49°C (32°F to 120°F).
Dimensions
81 x 22 x 23.5 mm (3-3/16 x 7/8 x 15/16 in.).
Weight (including battery, without cable)
45 g (1.6 oz)
Standards
Meets FCC Part 15, Directive 1999/5/EC and EN 50131-1 Grade 1 Class II.
Product Rebate
Accessories for this Product
Other Items to Consider
Product Reviews
Write your own review
Thanks for sharing your thoughts with us. Your review has been forwarded to our website team. Upon acceptance, it will be posted on this page within 24-48 hours.
Please complete the following fields:
Your Name (to display):
Your Email Address:
Review Headline:
