2-Channel Receiver Low Batt Output

The WR-300/2B is a dual-output wireless receiver operating in conjunction with a wide variety of Visonic 12-bit wireless devices, including portable and door/window transmitters, motion, glass-break and smoke detectors, coded keypads and range-extending repeaters. Designed for security, alarm and control applications, the WR-300/2B is easily integrated into virtually any security and remote control system.

To ensure secure wireless communications, the WR-300/2B receiver only responds to transmissions that include the same system code. Users select a system code from 256 possible combinations, and quickly apply it system-wide, using the 8-position DIP switch on each device.

Each of the two relay outputs is programmed to a different communication channel of the transmitters. Each channel may be used for any type of alarm: emergency call, motion, glass-break, smoke, etc. If the correct system code and channel are detected, the WR-300/2B responds by activating the corresponding relay output or outputs. In addition, the WR-300/2B monitors the transmitters' battery charge, via a separate voltage output and a supplied buzzer.

The WR-300/2B dual-output wireless receiver is available in two optional frequencies in compliance with European, U.S. and other international standards, and is approved for use by local authorities in most countries.

Features:

• Designed for security, alarm and control applications.
• 2 relay outputs, each set to a different channel of the transmitters.
• Easily integrated into virtually any alarm control panel.
• Secure communication with transmitting device based on user-defined system code (selected from 256 possible combinations).
• Supports flexible zoning of the remote transmitters – instant, delayed, fire, silent alarm, etc.
• Low-battery supervision to ensure continuous system operation at all times
• 11-14 Volt DC or AC power supply.
• Available in two optional frequencies in compliance with international standards.
• Supports the complete variety of Visonic 12-bit devices.

* Part number in North America is WR-200/2B

Please complete the following fields:

Review: