The AL300ULX power supply converts a 115VAC / 60Hz input, to a 2.5 amp of continuous supply current @ 12VDC or 24VDC power limited output.

Specifications:

• UL Listed for Access Control Systems (UL294), Burglar Alarm Systems (UL603),Hospital Signaling and Nurse Call Equipment (UL1069),Power Supply for Fire Protective Signaling and Systems (UL1481) CUL Listed - CSA Standard C22.2 No.205-M1983, Signal Equipment
• CSFM - California State Fire Marshal Approved.
• MEA - NYC Department of Buildings Approved.
• NFPA 72 compliant.
• Input 115VAC / 60Hz, .9 amp.
• AC input and DC output LED indicators.
• Class 2 rated power limited output.
• 12VDC or 24VDC selectable output.
• 2.5 amp continuous supply current.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection. Battery Backup:
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Maximum charge current 600mA.
• Zero voltage drop when switched over to battery backup.
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form "C" contacts).
• Power supply, enclosure, cam lock and battery leads.
• All models are available in red enclosure (add an "R" suffix to the part # e.g. AL300ULXR).
• Enclosure Dimensions: 13”H x 13.5”W x 3.25”D