These Power Distribution Modules conveniently distribute one single AC or DC input into nine seperate outputs, are made for supplying central power to Video Cameras, PIRs, Photobeams, etc. Each and every output is specially guarded with an automatically resetting PTC to prevent a shorted output from possibly disabling the other outputs. A visual power indication LED exists for each output along with one Master Power On/Off control. The modules can receive a 6 to 30 Volt AC or DC power source (not included) which either hooks up to the input terminal block or to the 2.1mm DC power jack connection located on the module. Two or more outputs can be combined to supply extra current.

FEATURES:

• Automatically Resetting (PTC) Overload Protection Capability (THIS MEANS NO FUSES to REPLACE).
• Includes a Master Power On/Off Switch Located on the Module.
• Visual LED Power Indicators available on each Output.
• Supplies Convenient Test Points for Measuring the Total Current Draw.
• Includes a Lifetime Limited Warranty.
• Housed by a Paintable White Plastic Enclosure

• Max Current Draw: PD9 = 250mA from each output. PD9HC = 400mA from each output.
• Max Combined Current Draw: Not to exceed Input Power Source.
• Input/Output Voltage: 6 to 30 Volts AC or DC.
• Input Connection: Screw Terminals or 2.1mm Plug-In DC Jack.
• Output Connection:Screw terminals (POS and NEG) for each output.
• Enclosure Size: 6.5" x 4.3" x 2".