|
Elk Products Audio Amplifier, 10 Watts - ELK-800
|
The ELK-800 is an excellent miniature public address audio amplifier. It may be connected to a telephone system paging output terminal, a microphone, or even to a standard single line phone set (see Basic PA system below). The sound source is amplified up to 10 watts, easily adjustable from an on-board volume control. Since the device may be installed remotely, it saves you much money by necessitating the use of only 22 - 24 Telco or alarm type wire. It is designed to operate on 12 to 24 volts AC or DC and can also support multiple speakers.
FEATURES:
- 10 Watt Amplifier
- Lengthened Telephone System Paging
- Does Not Require the use of 25 or 70V Line Transformers
- Supplies Multiple Speaker Hookups
- The unit requires only 22-24 gauge telco wire
- Internal Volume Control
- Small Size
- Surface Mounting ABS Enclosure with Snap-On Cover
- Comes with a Lifetime Limited Warranty
SPECIFICATIONS:
- Rated Output: 10 Watts**
- Operating Voltage: 12 to 24 Volts AC or DC**
- Speaker (Output) Load: 2 to 16 Ohms**
- Current Draw: 50 to 800 mA, Depending on Load and Volume Setting
- Input Impedance: 1000 Ohms Nominal
- Enclosure Size: 4.5" x 3" x 1.2" (111.8mm x 76.3mm x 29.2mm)
View the ELK-800 Instruction Manual
in Adobe Acrobat
format (right-click to save document to your hard drive)
**NOTE: The ELK-800 is primarily designed for short duration
(intermittent) paging applications. For long durations, such as playing
music, you may need to reduce the volume output, or lower the power input
voltage, or lower the speaker loading in order to keep the ELK-800 from
overloading and shutting down.
|
Price: $42.79
Buy Product Online | Visit Store Home
|
