The Visonic MKP-150 Keypad operates using two-way encrypted coded transmission and provides audible and visual indications of system status changes and alarms. A maximum of two MKP-150 keypad devices may be enrolled on the Visonic PowerMax Plus.
The MKP-150 may be operated either by AC power supply or by battery power. If AC power is used, the device operates continuously and the system status is constantly updated. If powered by batteries, the keypad enters sleep mode 15 sec after last key press. The keypad immediately becomes operational again upon pressing of any key.
Status, alarm memory, and trouble data retrieval from PowerMax+.
Automatic reporting to PowerMax+ of low battery voltage, AC failure, tamper.
Visual indications by red/green/amber LED and LCD display.
Keypad and LCD back lighting activated by long press (2 sec) of any key.
Light dim / brightness
Various audible signals sounded by the speaker in response to specific actions.
Automatic supervision messages.
Diagnostic test of PowerMax+.
Two long-life 3 Volt Lithium batteries.
Operating Frequencies: 315 MHz (in USA & Canada) or other UHF channels per local requirement in the country of use.
Receiver Type: Super-heterodyne, fixed frequency
Receiver Range: 600 ft (180 m) in open space
Antenna Type: Spatial
Coding: Two-way wireless protocol
For indoor use only.
Operating Temp. Range: 0C to 49C (32F to 120F)
Storage Temp. Range: -20C to 60C (-4F to 140F)
Humidity: 85% relative humidity, @ 30C (86F)
Dimensions: 172 x 99 x 39 mm (6 7/8 x 3 15/16 x 1 9/16 in.)
Weight: 375 g. (13 oz)
Accessories for this Product
Other Items to Consider
Write your own review
Thanks for sharing your thoughts with us. Your review has been forwarded to our website team. Upon acceptance, it will be posted on this page within 24-48 hours.
Please complete the following fields:
Your Name (to display):
Your Email Address: